Servo motor and servo controller
HD-630E vertical Spool type vertical auto Taping Machine
This vertical Spool type vertical auto Taping Machine wraps the tapes (Mica tape, Cotton tape, Transpanent tape, Fire-resistant tape, Aluminum foil, Drawing tape etc) onto bare copper or wire core through turntable rotating.
It is one of the special equipment for producing fireproof cable, control cable, communication cable and so on. The model is advanced in design, reasonable in configuration and convenient in operation. It has the advantages of stable performance, fast wrapping paper speed, good quality, superior intelligent control, low noise, time saving and electricity saving and other similar models.
The main functions of this machine are:
(1) the use of the Spool type, the length of the bag is long, equivalent to the disk type mica belt 15-20 plates, basically do not have to change the belt, the continuous use of 8000-10000 meters no stop, save the workers to change.
With time and intensity of work, it can achieve unmanned operation or 1 people operate 4-6 machines, saving labor intensity of labor and labor.
(2)The broken belt automatically auto stops, the line breaks down auto stops, and the workers operate multiple machines to deal with it calmly.
(3) The winding tension is automatically controlled by Servo motor and servo controller, which is automatically controlled by SIEMENS PLC. The tension is stable and the wrapping quality is good.
(4) Adopt advanced turntable structure, reduce wind noise, realize real high speed wrapping.
(5) Using the human-machine interface color touch screen to operate the whole machine, real-time production data is displayed at a glance.
Type | HD-630E | HD-800E |
Suitable number of Taping layers | Single layer,two layer,three layer,four layer | Single layer,two layer,three layer,four layer |
Suitable for | Spool type: Mica tape, paper tape, transparent tape,Aluminum foil tape, strap, etc. | Spool type: Mica tape, paper tape, transparent tape,Aluminum foil tape, strap, etc. |
Wire diameter | soft structure 0.8-12mm, hard structure below 10mm2 | soft structure 0.8-12mm, hard structure below 10mm2 |
Rotation speed | non load max 2000rpm, loaded max1800rpm | non load max 2000rpm, loaded max1800rpm |
Applicable wrapping belt | Outer diameter:Φ280 mm Center hole:Φ76 mm Height:80-120mm | Outer diameter:Φ280 mm Center hole:Φ76 mm Height:80-120mm |
Pitch adjustment | Man-machine interface, input data can be no pole adjustment | Man-machine interface, input data can be no pole adjustment |
Pay-off Stand mode | Shaftless bilateral top tightened magnetic powder tension | Shaftless bilateral top tightened magnetic powder tension |
Take-up rack mode | Shaftless bilateral top tightened,torque motor | Shaftless bilateral top tightened,torque motor |
Winding disk size | External diameter:Ф400-Ф630mm Width:280-475mm Shaft hole:Ф56-80mm | External diameter:Ф630-Ф800mm Width:450-600mm Shaft hole:Ф56-80mm |